English
简体中文
Français
日本語
한국어
Português
Русский
Español
Website navigation
Position:
E-mail:
Tell:
Whatapp:+(86) 180-3717-8440
Address:No.18 Hongye Road,Hi-tech zone,Zhengzhou,China,450000
Tel Number
181-3719-5600
product description:
KJ-V220W-G vacuum hot pressing furnace is a complete set of equipment for hot pressing materials under vacuum (or other atmosphere) conditions. It mainly uses resistance heating and the pressure head driven by an oil cylinder is pressurized up and down. Under high temperature, the solid particles of the green body are interconnected, the crystal grains grow, the voids (pores) and the grain boundaries gradually decrease. Through the transfer of the material, the total volume shrinks and the density increases, and finally becomes a kind of microstructure. The structure of the dense polycrystalline sintered body, so as to press the material into shape.
Structure and composition:
Vacuum hot pressing furnace is mainly composed of furnace body, furnace cover, furnace cover lifting system, furnace bottom, heating and heat preservation and temperature measurement system, pressurization system, vacuum system, water cooling system, control system, etc.
Product Usage:
KJ-V220W-G vacuum hot pressing furnace can combine vacuum/atmosphere, hot pressing forming and high temperature sintering. It is suitable for high temperature heat forming of new materials such as powder metallurgy and functional ceramics, such as transparent ceramics, industrial ceramics and other metals. As well as the vacuum sintering of alloy materials composed of refractory metals and the high-temperature sintering of ceramic materials silicon carbide and silicon nitride, it can also be used for the heat treatment of powder or compacts at a temperature lower than the melting point of the main component. The purpose is to pass between particles The metallurgical combination to improve its strength.
The structure design of the KJ-V220W-G vacuum hot pressing furnace is advanced and reasonable, and the design and manufacturing conform to the corresponding national and industry standards and specifications, and can meet the user's requirements. The energy saving effect of the equipment is good. It is convenient and simple to use, operate and maintain, beautiful in appearance, safe and reliable, and excellent after-sales service. The supporting products and components have the international advanced level, which can meet the long-term, stable, safe and reliable production demand.
product name
2200℃ vacuum hot pressing furnace
Product number
KJ-V220W-G
Equipment form
Vertical
Heating form
Graphite resistance heating
heating power
40KW+10% (subject to actual power)
Working size
Φ160×160mm (diameter×height)
Maximum temperature
2200°C
Rated temperature
2000℃ (this temperature is the acceptance standard)
Ultimate vacuum 6.67×10-3Pa (empty furnace, cold state, purified)
Indenter diameter Φ85 mm
Maximum pressure 20T (digital display)
Pressure stroke
0～100mm
Pressure method
Single downward pressure
Temperature control accuracy
±1℃
Temperature control instrument shimaden
Temperature control sensor Tungsten rhenium thermocouple + infrared temperature measurement (U.S. Radium)
Pressure rise rate ≤4Pa/h
Protective atmosphere :Argon or high purity nitrogen
Water quality requirements :PH value 7.0～8.5, suspended solids <100mg/L, total hardness CaO<10mg equivalent/L, dissolved solids <30mg/L, conductivity <500μS/cm
Requirements for use: The altitude is below 1000M, the ambient temperature is 0 to 45 degrees, and the humidity is 15% to 45%.
